Youtube

Facebook

Twitter

 


Úvod » SOFTWARE » Showtacle » Fiesta.NET Master


    

Fiesta.NET Master

Fiesta.NET is a new laser show controller working over Ethernet. The main advantages are perfectly smooth laser output, maximal scan rate up to 100 000 pps and integrated DMX control (out and in).

doprava zdarma

Skladom

 

Dimensions: 128 x 125 x 58 mm
Maximal scan rate: 100 000pps
Frames Per Second: 35
Axes: X and Y, +/- 5V, balanced, 16 bit
Colour outputs: 6 channels, 0-5V unbalanced
DMX: Integrated In/Out, 512 channels
Serial port: Integrated
IP adress range: 192.168.1.1 - 192.168.1.254
Input power: 12 V DC, 170 mA
naša cena bez DPH : 790,00 EUR
naša cena s DPH (20 %):
948,00 EUR

do košíka:
  ks  
Strážny pes

 

Do you like simple but powerful solutions?

While developing Fiesta.NET controller we've focused on simplicity already well-known from Fiesta software. It takes usually less than a minute to configure connected Fiesta.NET devices. You don't need to worry about changing IP address of your computer or other complicated stuff - just plug your Fiesta.NET and you can start work immediately.
Also the setting of every device's IP address is more similar to setting DMX address than setting complicated computer accessories.

No hardware key is used already. So you don't need to be afraid of loosing it by doing some event.

Do you need perfectly stable laser output?

The usual problem of USB controllers was the smoothness of animation. We've already solved this with Fiesta.NET. The laser show effect or animation is always perfectly smooth even by using more laser systems at once. Also the colors of your laser system will shine like never before - thanks to external power source Fiesta.NET is able to provide full power for your laser system.

Do you want to make your installations easier?

Thanks to Ethernet connection Fiesta.NET allows easier and faster installations. If you require a 100% reliable solution, you just need to use one Ethernet cable from the control centre to the stage. There you can put one Ethernet switch and you are ready to connect your lasers.

Do you hate wires?

Especially for large laser show events you usually have to use a lot of wires. That's where the Wi-Fi connection can help. Yes, you can use Fiesta.NET even over Wi-Fi. Whole workspace and all the features of Fiesta.NET are working over Wi-Fi in real time. So you can edit your shows or handle whole live events without usual huge amount of cables. And what happens when the Wi-Fi signal is lost? Fiesta.NET will reconnect and start work again after the signal is restored.

What else do you need to know?

Fiesta.NET laser controller comes with new software called Fiesta.NET. It's based on already tested and reliable Fiesta! 2 software with some special additional features. We've used it already for our laser show events and it's working perfectly even using your notebook. It's working on all current operating systems - Windows 2000, XP and Vista. Both 32 and 64 bit versions are supported. Windows 7 support will be available after this operating system is released.

 

 

 

 

 

NÁZORY A OTÁZKY NÁVŠTEVNÍKOV

Nebol zatiaľ pridaný žiadny názor. Pridajte svoj názor alebo dotaz ako prvý.

Weight: < 1 kg
NmJlM
Strážny pes
Watch DOG


Informovať na e-mail pri zmene:


       keď cena klesne pod EUR

        keď produkt bude na sklade


Zadajte Váš e-mail: