Professional, fully analog modulated RGB whitelight pure diode show laser light system by tarm
The tarm two show laser projector is a full color whitelight RGB laser systems with full analog color modulation and diode-only equipment. The guaranteed output power is specified at 2'500 mW after optics.
This show laser light can be controlled via ILDA. It has a switchable scan safety and switches for x-axis and y-axis flip. Color intensity can be adjusted with trim pots per color channel.
The tarm two laser has great beam specifications with a diameter of ca. 3.5 mm and a beam divergence of approx. 0.9 mrad (full angle).
It is equipped with a bright red (750 mW / 638 nm), a green (700 mW / 520 nm), and a blue (1'500 mW / 450 nm) diode laser source.
The scanners are very fast with 45 kpps @ 8° ILDA standard and allow for a maximum scan angle of 45° (@ 30 kpps). Thus they are well graphics capable and suitable for professional laser applications.
The housing of the tarm two is built very rugged and in a dust-proof way, so there is no air circulation inside the enclosure. This reduces maintenance efforts to a minimum.
The mounting bracket allows for hanging and for upright mounting of the laser system.
|Scanning system:||45 kpps @ 8° ILDA /scan angle max 45°/30kpps/|
|Beam Specifications (full angle):||ca. 3.5 mm / 0.9 mrad|
|Power Consumption:||100 W|
|Dimensions / L x W x H /:||220x220x150 mm|
|Accessories:||power cable, manual, key, interlock connector|