Kontakt: /00421/ 0904 887 226 , miroxx@miroxx.sk       

E-shop

 

Youtube

 

Facebook

 

 

 

 

 

Úvod » SPECIAL OFFERS » TARM "2.5" laser projector / integrated Shownet /


        

TARM "2.5" laser projector / integrated Shownet /

Skladom

 

Professional, fully analog modulated RGB whitelight pure diode show laser light system by tarm with integrated ShowNET network interface and free laser show software

akcia doprava zdarma

naša cena bez DPH: 1 690,00 EUR

naša cena s DPH(0 %): 1 690,00 EUR


do košíka:
  ks  
Strážny pes
Power Red: 700mW/638nm
Power Green: 750mW/520nm
Power Blue: 1500mW/450nm
Scanning system: 45 kpps @ 8° ILDA /scan angle max 45°/30kpps/
Beam Specifications (full angle): ca. 3.5 mm / 0.9 mrad

The tarm 2.5 show laser projector is a full color whitelight RGB laser systems with full analog color modulation and diode-only equipment. The guaranteed output power is specified at 2'700 mW after optics.
The tarm 2.5 (ShowNET) comes with integrated ShowNET network interface and free laser show software. Details in the box below.

The benefits include:

  • 2'700 mW guaranteed output power
  • a very fast maximum scan speed of 45 kpps@8° ILDA for graphics projection
  • high-precision diode arrays provide an excellent beam divergence of less than 1.0 mrad for a low beam diameter
  • pure diode laser
  • novel method for increasing the beam precision of the single-mode diodes
  • beautiful colors and good color fading
  • the tarm 2.5 impresses with a very bright 638 nm single mode red
  • trim pots for adjusting color intensity

 

The tarm two laser has great beam specifications with a diameter of ca. 3.5 mm and a beam divergence of approx. 0.9 mrad (full angle).
It is equipped with a bright red (750 mW / 638 nm), a green (700 mW / 520 nm), and a blue (1'500 mW / 450 nm) diode laser source.

The scanners are very fast with 45 kpps@8° ILDA standard and allow for a maximum scan angle of 45° (@30 kpps). Thus they are well graphics capable and suitable for professional laser applications.
Optionally as upgrade available: CT-6210H scanners incl. LAS Turboscan driver with 60 kpps@8° ILDA and a max. scan angle of 60° (@35 kpps).

This show laser light has a switchable scan safety and switches for x-axis and y-axis flip. Color intensity can be adjusted with trim pots per color channel.

The housing of the tarm 2.5 is built very rugged and in a dust-proof way, so there is no air circulation inside the enclosure. This reduces maintenance efforts to a minimum.
The mounting bracket allows for hanging and for upright mounting of the laser system.

The tarm 2.5 is especially suitable for show laser applications in clubs and bars and can be used by beginners as well as professionals.

+ Integrated ShowNET incl. free laser show software

The tarm 2.5 features an integrated ShowNET network interface with free laser control software included
Start with your own professional laser show thanks to the intuitive Showeditor laser show software which comes with every new tarm 2.5 (ShowNET) for free. The Showcontroller software is supported as well and can be purchased additionally.
The integrated ShowNET allows for direct input through ILDA and LAN. Besides DMX, it is possible to trigger single frames via ArtNet. You can play custom frames and shows from an integrated SD card (included in delivery) – even in stand-alone mode!
There are two different DMX modes
(1) DJ Mode with the most used features for beginners. Only a few DMX channels are used for a quick and easy access to the most important adjustments directly at the laser system.
(2) Professional Mode with all DMX features especially for users with a DMX console. All adjustments can be triggered and allow for full control of the professional laser show.
The integrated ShowNET works as DAC (digital to analog converter) and enables ILDA streaming.

NÁZORY A OTÁZKY NÁVŠTEVNÍKOV

Nebol zatiaľ pridaný žiadny názor. Pridajte svoj názor alebo dotaz ako prvý.

Power Red: 700mW/638nm
Power Green: 750mW/520nm
Power Blue: 1500mW/450nm
Scanning system: 45 kpps @ 8° ILDA /scan angle max 45°/30kpps/
Beam Specifications (full angle): ca. 3.5 mm / 0.9 mrad
Power Consumption: 100 W
Weight: 7 kg
Dimensions / L x W x H /: 220x220x150 mm
Accessories: power cable, manual, key, interlock connector
YTNlN
Strážny pes
Watch DOG


Informovať na e-mail pri zmene:


       keď cena klesne pod EUR

        keď produkt bude na sklade


Zadajte Váš e-mail: