Úvod » TARM LASERS » TARM "2.5" laser projector
Professional, fully analog modulated RGB whitelight pure diode show laser light system by tarm
The tarm two show laser projector is a full color whitelight RGB laser systems with full analog color modulation and diode-only equipment. The guaranteed output power is specified at 2'500 mW after optics.
This show laser light can be controlled via ILDA. It has a switchable scan safety and switches for x-axis and y-axis flip. Color intensity can be adjusted with trim pots per color channel.
The tarm two laser has great beam specifications with a diameter of ca. 3.5 mm and a beam divergence of approx. 0.9 mrad (full angle).
It is equipped with a bright red (750 mW / 638 nm), a green (700 mW / 520 nm), and a blue (1'500 mW / 450 nm) diode laser source.
The scanners are very fast with 45 kpps @ 8° ILDA standard and allow for a maximum scan angle of 45° (@ 30 kpps). Thus they are well graphics capable and suitable for professional laser applications.
The housing of the tarm two is built very rugged and in a dust-proof way, so there is no air circulation inside the enclosure. This reduces maintenance efforts to a minimum.
The mounting bracket allows for hanging and for upright mounting of the laser system.
Nebol zatiaľ pridaný žiadny názor. Pridajte svoj názor alebo dotaz ako prvý. |
Power Red: | 700mW/638nm | ||
Power Green: | 750mW/520nm | ||
Power Blue: | 1500mW/450nm | ||
Scanning system: | 45 kpps @ 8° ILDA /scan angle max 45°/30kpps/ | ||
Beam Specifications (full angle): | ca. 3.5 mm / 0.9 mrad | ||
Power Consumption: | 100 W | ||
Weight: | 7 kg | ||
Dimensions / L x W x H /: | 220x220x150 mm | ||
Accessories: | power cable, manual, key, interlock connector |